
8
ENGLISH
GB
position, the cutting deck must be lowered
when parked, stored or when the machine is left
unsupervised.
• If the petrol tank is to be emptied, this must take
place outdoors.
• Store the machine so that children cannot get to it.
STORAGE
Empty the petrol tank. Start the engine and let it
run until it stops.
Replace the oil while the engine is still warm.
Unscrew the spark plug and pour a tablespoonful
of oil into the cylinder. Rotate the engine a few
turns to that the oil is distributed in the cylinder.
Install the spark plug.
Clean the entire machine. It is particularly
important to clean under the cutting deck. Touch
up paint damage to prevent rust.
Store the machine indoors in a dry place.
Machines with an electric starter:
Remove the battery. Store it well charged in a cool
place (between 0°C and +15°C).
At the correct storage temperature, the battery
should be maintenance-charged every four
months.
The battery acid is extremely corrosive
and can cause injuries and damage to
skin and clothing. Always use rubber
gloves and glasses (goggles) to protect
your eyes. Avoid inhaling any acid
vapour.
Do not incline the battery too much so
that the battery acid can run out onto
hands or clothing. If this should
happen, rinse with plenty of water.
ASSEMBLY
To avoid injury and damage to people
and property, do not use the machine
until all the measures under “ASSEM-
BLY” have been carried out.
ACCESSORIES BAG
The machine is supplied with a plastic bag contain-
ing components which must be installed prior to
use. The bag contains (fig. 1):
Pos. No. Designation Dimension
A 1 Spark plug sleeve
B 1 Torsion pin ditto
C 1 Tension pin 6 x 36
D 1 Shim washer 16 x 38 x 0.5
E 1 Shim washer 16 x 38 x 1.0
F 2 Shoulder washer
G 4 Screw 8 x 20
H 2 Wing nut
I 2 Washer 8.4 x 24 x 2.0
J 1 Drawing plate
K 2 Screw 8 x 20
1 Spare key
1 Battery belt
ENGINE HOOD
To fill with fuel and to inspect and maintain the en-
gine and battery, open the engine hood. The en-
gine must not be running when the hood is
opened.
Opening:
1. Ensure that the control arms are in their forward
positions.
2. Raise the seat lock (fig. 2) and fold the seat for-
wards.
3. Grasp the front edge of the engine hood and fold
up the hood (fig. 3).
Closing:
Grasp the front edge of the engine hood and fold
down the hood (fig. 3).
The machine may not be operated un-
less the engine hood is folded down.
Risk of burns and crushing injuries.
BATTERY
The battery is a valve-regulated battery with 12 V
nominal voltage. The battery is completely main-
Comentários a estes Manuais