Mountfield 2105M Manual de Instruções descarregar pdf (Página 11)

ENGLISH

2/3. Operating position.

4. Start position – the electric start motor

is activated when the key is turned to the

spring-loaded start position. Once the en-

gine has started, let the key return to oper-

ating position 2/3.

7. GEAR LEVER (2105M)

A lever for selecting one of the five forward gears

in the gearbox (1-2-3-4-5), neutral (N) or reverse

(R).

The clutch pedal must be kept pressed in when

changing gear.

NOTE! You must make sure the machine is quite

stationary before changing from reverse to forward

gear or vice versa. If a gear does not engage imme-

diately, release the clutch pedal and then press it in

once again. Engage the gear once again. Never

force a gear in.

8. POWER TAKE-OFF

A lever for engaging and disengaging the power

take-off for operating the cutting deck. Two posi-

tions:

1.Forward position – power take-off dis-

engaged.

2. Backward position – power take-off en-

gaged.

9. CLUTCH RELEASE LEVER

(2125H)

A lever for disengaging the variable transmission.

Enables the machine to be moved by hand without

the help of the engine. Two positions:

1. Lever pressed in – transmis-

sion engaged for normal opera-

tion.

2. Lever pulled out – transmis-

sion disengaged. The machine

can be moved by hand.

The machine may not be towed over long distances

or at high speeds. The transmission could be dam-

aged.

AREAS OF USE

The maximum vertical load on the towing hitch

must not exceed 100 N.

The maximum over-run load on the towing hitch

from towed accessories must not exceed 500 N.

NOTE! This machine is not intended to be driven

on public roads.

STARTING AND OPERATION

FILLING THE FUEL TANK

Open the engine hood. Unscrew the filler cap and

fill with clean, lead-free petrol. You must never

use 2-stroke petrol mixed with oil (fig. 11).

NOTE! Bear in mind that ordinary lead-free petrol

is a perishable; do not purchase more petrol than

can be used within thirty days.

Environmental petrol can be used, i.e. alkylate pet-

rol. This type of petrol has a composition that is

less harmful for people and nature.

Petrol is highly inflammable. Always

store fuel in containers that are made

especially for this purpose.

Only fill or top up with petrol outdoors,

and never smoke when filling or top-

ping up. Fill up with fuel before starting

the engine. Never remove the filler cap

or fill with petrol while the engine is

running or still warm.

Never completely fill the petrol tank. Leave an

empty space (= at least 2-3 cm at the top of the

tank) to allow the petrol to expand when it warms

up without overflowing.

CHECKING THE ENGINE OIL LEVEL

On delivery, the crankcase is filled with SAE 30

oil.

Check the oil level every time before using to

ensure it is correct. The machine should be

standing on level ground.

Wipe clean around the oil dipstick. Un-

screw and pull it up. Wipe off the dipstick.

Slide it down completely and tighten it.

Then unscrew it and pull it up again. Read off the

oil level. Top up with oil to the “FULL” mark, if

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Comentários a estes Manuais

Sem comentários

Mountfield 2105M Manual de Instruções Página 11

Comentários a estes Manuais

Manuais e produtos relacionados com não Mountfield 2105M